MILWAUKEE® TOOL Goes Down the Drain with Drain Cleaning Tools
MILWAUKEE® TOOL is at it again, IMPRESSIVE.
MILWAUKEE® is committed to providing drain cleaning professionals with the most portable and versatile drain cleaning solutions.
Through a thorough evaluation of the job at hand – the frustrations, needs, previous limitations – MILWAUKEE® sets out to completely rethink a solution, delivering game-changing innovation.
Whether it be expanding equipment capabilities with interchangeable drums, instantly set up with cordless power, or fully enclosed drums for best mess containment, providing the best solution for the line.
MILWAUKEE® is committed to developing solutions that improve the ability of drain cleaning professionals to service more calls with less hassle.
Included in this set offering FREE Goods is:
– M18 FUEL™ Drain Snake w/CABLE DRIVE™ Kit
– M18 FUEL™ SWITCH PACK™ Sectional Drum System 1/2″ Kit
– M12™ Drain Snake Kit
– M12™ AIRSNAKE™ Drain Cleaning Air Gun Kit
– TRAPSNAKE™ PORCELAIN AUGER SYSTEM
COME INTO ONE OF OUR SHOWROOMS OR CONTACT YOUR AIS SALES REPRESENTATIVE FOR MORE INFORMATION!
SUMNER – LIFTING MADE EASIER
Sumner Versatile Lifts That Makes One Man A Crew!
Less labor on the job makes for higher profits too!
Take a quick look at just a few of the Featured items listed in this promotion.
The Roust-A-Bout Lift allows one man to lift and place loads in tight locations. It can raise 1,500-pound loads to heights up to 25 feet in minutes. Plus, the load can be moved vertically and horizontally at the same time.
The Series 2100 CONTRACTOR LIFT is equipped with features like plunger pins for quick readjustment and compact storage, reversible forks and a large 7/32’’ load cable. Lockable 5’’ polyurethane casters. compact enough to roll through standard doorways and fail gates.
Check out the Series 2400 CONTRACTOR LIFT that Makes junction box installation a simple, one-man operation. Super compact, with up to 450-pound lift capacity. One piece construction — no tools or loose hardware to worry about. Fits most SUVs and vans for easily one-person portability. Leg roller allows the unit to wheel in stored position.
Cricket Pipe Dolly for up to 12” Pipe with Flat Free Tires. This little Bad-Boy transports 20 ft pipe lengths up to 1,000 Lb. and comes with ratchet hold-down straps.
Tainer Mac™ 60 – Material and Parts Cart
A mobile, heavy duty stacking container for the contractor. Stacking saves valuable floor space while still allowing access to the bottom tainer mac.
Click on the flyer image above to see all the lifts, racks, carts and jacks that will help make your job easier and safer too.
AIS ANNOUNCES BLOW OUT SALE OF 30% – 60% SAVINGS ON JET HOISTS
For more than 50 years, industrial tradesmen have relied on JET® to provide the safest and most durable chain and lever hoists for their lifting, pulling and holding applications.
If you are looking for a hand operated chain hoist or a best-in-class lever hoist equipped with overload protection and shipyard hooks, AIS and JET has the right product to fit the toughest jobs in the most demanding environments and NOW Blow Out Savings on many different models.
JET® JLH Series Lever Hoists incorporate safety, durability, and heavy-duty construction for operation in severe industrial environments.
Safety comes standard with features such as overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity.
The JET® JLH Series is available in a ¼ ton to 9-ton capacities, with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). Whether it’s inverted, vertical, horizontal, or any other load angle, the JET® JLH lever hoist is the solution for your heavy-duty industrial needs.
JPW Industries & AIS announce Promotions on JET and WILTON Tools
Check out the Great Deals on WILTON & JET!
JPW Industries is proud to provide a full line of industrial tools designed to meet the needs of the most demanding tradesmen. From the Shop to the Warehouse, to the Job-site, JET, and WILTON Tools are engineered to be durable, reliable and safe.
It was 70 years ago that WILTON designed the first Bullet Machinist Vise and created the groundwork of quality craftsmanship.
WILTON regular-duty C-Clamps are ideal for steel fabrication, industrial maintenance, industrial welding, and production.
From the moment you start working with JET, it’s easy to see what makes us different. At every level of our organization, we’re end-user focused.
JPW Industries is constantly striving to provide a better experience for anyone who uses JET and WILTON products. They have wide offerings of products to cover the many job-site challenges our users face.
All JET Machines and Equipment are backed by industries most comprehensive warranties.
Impressive Innovations by Louisville Ladder in Denver!
Featuring the new Louisville Fiberglass Cross Step 2 in 1 Ladder FXS1500 series
TAKE ADVANTAGE OF THESE EXCITING PROMOTIONS TODAY!
The 6 foot fiberglass ladder has a Type IA duty rating with load capacity of 300 lbs.
This ladder combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations.
The shelf design and its unique ProTop and innovative locking mechanism allow for positioning against a wall, building, or pole.
When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area.
The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder’s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools.
Other features include Louisville Ladder’s patented SHOX impact absorption system, new Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets.
The new Louisville FXS1506 Fiberglass Cross-Step ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
AIS now offers the LogoLock™ system for Fiberglass Ladders
For only $6 per ladder you can promote your company name with the LogoLock™ system.
– Deter theft by displaying your logo.
– Customize the image of your ladders
– Long–lasting image embedded the fiberglass rail facing out
– Allow 48 hour lead time upon logo approval
– NO CHARGE FOR SETUP FEE!
CONTACT YOUR AIS SALES REPRESENTATIVE FOR MORE INFORMATION!
Sunex Tools features Great Values with Quality Industrial Products
Sunex offers a complete line of impact sockets, air tools, hand tools, service carts, creepers, seats, hydraulic jacks, as well as the USA made hydraulic presses.
Efficiency saves you valuable time and money. Sunex® Tools Shop Equipment gets you close to your work and helps you stay there.
Whether you’re grinding, cutting, sanding, spraying, hammering, drilling or driving Sunex and Sunex HD air tools are guaranteed to perform. Sunex is legendary for making top-quality impact sockets at the best value.
With their complete line-up features over 2,500 individual sockets & sets with every style and application available to the market, Sunex is your number one socket source.
Leave the heavy work to the Sunex tools complete lineup lifting equipment. Jacks hoists, stands, you name it with low profiles and quick-lift technology our jacks fit almost any application.
The professional quality and strength you need all at the ultimate value.
JOBOX ON-SITE WORK BENCHES, STORAGE CHESTS, SAFETY CABINETS, SAFETY CANS
Click image to Open and Enlarge in PDF format to Read and Print
AIS Is The Area’s Largest JOBOX Distributor And We Can Get Any JOBOX Item You Need!
See the Great Deals on JOBOX On-Site Rolling Work Benches, Chests, Storage Boxes, Safety Cabinets and Safety Cans TODAY!
Sumner Celebrates 50 Years with NEW Products
Click image to Open and Enlarge in PDF format to Read and Print
Sumner has a tradition of high quality and value with its line of Material Lifts. Designed and Built for job site use and abuse, our products help move heavy loads safely and easily.
Sumner is recognized as the leader in pipe handling equipment, our product range includes equipment for a wide variety of contractors.
All Sumner products are built with the concept of providing safe, common sense tools which are priced right.
Sumner tools are used daily in over 50 countries and Sumner branches are available in Canada, the UK, and The Netherlands to better serve these markets.
Featured Items –
Lift Cart – Mast, base, and cradle fit neatly and securely on the truck. The 10’’ wheels are ideal for job site terrain or going up or downstairs.
Fold-A-Jack – 2,500-pound vee head capacity. Folds up for storage ease and a carrying handle for ease of transporting.
Heavy Duty Jack With Roller Head – Allows one man to lift and place loads in tight locations.
It can raise 1,500-pound loads to heights up to 25 feet in minutes. Plus, the load can be moved vertically and horizontally at the same time.
AIS Industrial Construction Supply is your source for Industrial & Construction tools and supplies since 1945.
All of the items featured on this website are stocked at our 4,000 square foot showroom, 50,000 square foot Warehouse (on-site) or in our local Denver True Value warehouse. Feel free to give us a call and find out what quality customer service is like.
Since 1945 AIS Industrial & Construction Supply of Denver Colorado has been providing products and services to professional end-users in many different fields around the Rocky Mountain region.
While many other industrial and construction supply businesses have come and gone, AIS attributes its longevity by excellence in customer service, know-how and a willingness to help the end-user solve problems, completing their jobs faster, easier and more cost-efficient than the competition.
In other words, we do our job better which helps our customers do their jobs better and more cost effective therefore making more profit.
AIS Industrial & Construction Supply works with both large companies and small to solve a multitude of different project issues or even just one, maybe like safety supplies.
With our long history in business and all the relationships created along the way, we have a broad line of products such as hand tools, power tools, Portable Work Shelters, extension ladders as well as accessories like abrasives or services from equipment sales to shelving, racks, lockers and storage solutions and even Seismic Bracing Cable, all along with our own in-house tool repair facility that makes us a “One-Stop-Shop” for your many needs, that may require immediate attention.