Home > RIDGID Pipe Beveller Cutter

RIDGID B500 Transportable Pipe Beveller offered by AIS Industrial Construction Supply in Denver, Colorado

Creating bevels can be a lot faster, easier and more precise than this introducing a better way. The RIDGID B-500 transportable pipe beveller, its compact design easily mounts to the end pipes and flat plate allowing the operator to set up and create uniform bevels quickly and accurately in a single pass.

A rugged cutting-head bevels pipe without flame or sparks. The land death can be easily adjusted to meet the job requirement. Interchangeable heads allow you to cut bevels at thirty degrees, thirty seven and a half degrees and forty five degrees. On pipe up to one half inch thick and four inches and up in diameter and on flat plates up to one half inch thick.

RIDGID B500 Pipe Beveller DenverSpeed monitoring with indicator lights keep the beveller moving at an optimal pace. Now you can easily achieve fast accurate and consistent bevels in one pass. Save valuable time and produce high-quality results with the new RIDGID B-500 transportable pipe beveller.

Call at AIS Industrial Construction Supply at (303) 355-2391

The RIDGID B-500 Transportable Pipe Beveller produces a high-quality bevel in less than two minutes (on Schedule 40 pipe with a diameter of 12” or less) without flames or sparks.

The compact design quickly mounts to pipes 4” and up with a maximum wall thickness of a ½” and creates consistent bevels in a single pass.
RIDGID B-500 Pipe Beveller DenverRIDGID Pipe Beveller B-500 PDF Catalog Sheet Here

More Information about the RIDGID Pipe Beveller B-500 in Denver:

Set-up and bevel 12″ diameter schedule 40 pipe in one pass in under 2 minutes using the new B-500 Transportable Pipe Beveller.

Speed
• Set-up And Bevel 12″ Diameter Schedule 40 Pipe In Under 2 Minutes!
• Pipe Is Cool To Touch Immediately Following Bevelling

Consistency
• Accurate Bevel Angle Around Diameter Of The Pipe Allows For Optimal Number Of Cover Passes
• Adjustable Land Width From 0″ to 3/16″ To Fit Welders’ Requirements
• Produces A Machined Finish Due To 6 Replaceable Cutter Inserts Working Simultaneously

Simplicity
• Fast To Set-up And Operate
• Patent-Pending Clamp System Firmly Secures Tool To The Pipe
• Speed Monitoring With LED Indicators For Optimal Cutter Performance
• Spark Free Operation

B-500 TRANSPORTABLE PIPE BEVELLER

SPECIFICATIONS:
• Capacity………………………………4” Pipe And Larger, Flat Plate
• Pipe Wall/Plate Thickness…………………..Min 0.188″ (4.8 mm)/Max 0.50″ (12.7 mm)
• Bevel Angles………………………. 37.5° (Standard – Included) 30° and 45° (with Optional Cutter Heads)
• Cutter Head…………………………Rated For Most Steel & Stainless Steel*
• Weight……………………………. 52.5 lbs. (23.8 kg), Tool Weight
• Size………………………………… 15.8 in. (401 mm) L x 11.5 in. (292 mm) W x 13.3 in. (338 mm) H
• Land Width……………………… 0″ – 3/16″ (4.8 mm) in approximately 1/32″ (0.8 mm) increments
• Motor Type……………………….Universal Single Phase
• Motor Rating…………………….1.2 HP, 115V, 50/60Hz
• Amps………………………………13A (115V),
• Operating Speed……………….(No Load): 950 RPM (115V)
• Body……………………………….Steel Frame
• Standard Equipment…………. Beveller, Manual Crank Handle, 371/2° Cutter Head, 6 – 4 Edged Inserts, Torque Driver, and Screws

* Beveller cutting head and inserts are optimized for standard A53 mild steel pipe. Reduced insert life can be expected on other materials.

RIDGID B-500 Transportable Pipe Beveller optional accessories or additional parts:

The following lines contain CATALOG NO.  – DESCRIPTION  – WEIGHT (lb.) (kg)
49298 Portable Pipe Beveller w/ 371/2° Cutter Head 115V 56.5 24
48863 371/2° Cutter Head w/6 Inserts, 1 Anti-Seize Grease, 8 Screws 2.5 1.1
48858 30° Cutter Head w/6 Inserts, 1 Anti-Seize Grease, 8 Screws 2.5 1.1
48868 45° Cutter Head w/6 Inserts, 1 Anti-Seize Grease, 8 Screws 2.5 1.1
48873 Pack of 6 Inserts 1 Anti-Seize Grease, 2 Screws, Case 0.25 0.11
48883 Anti-Seize Grease – 1 Tube — —
48888 Torx Wrench T15/S7 0.05 0.02
48893 Spanner Wrench 0.15 0.06
48898 5/16 Hex Wrench 0.17 0.08

Pay It Forward –